General¶

The insight-mobile and -web applications can be configured with the Client Configuration. Each application has its own file.

Insight-Web (Table entries with Web).

In the folder of insight-web must be a file called: config.js

Example content:

var Config = {
    "server": "/",
    "eamType": "maximo"
}

Insight-Mobile (Table entries with Mobile).

For Browser:
- In the folder of insight-mobile must be a file called: config.js
- Example content:
```
var Config = {
    "server": "/",
    "eamType": "maximo"
}
```
For Mobile-App:
- The app must know which insight server has to be used. On first app start you have to configure the server URL. This server URL can be a valid insight Server or a configuration file. The app automatically checks for different paths on the server. Here are some examples:
  - For all examples: Insight is installed on https://your-insightserver.com/insight/...
  - Without config.json (all defaults) (Maximo)
    - Server URL in app: https://your-insight-server.com/
  - Config at default location: https://your-insight-server.com/insight/mobile/config.json (We advise on this variant.)
    - Server URL in app: https://your-insight-server.com/
    - config.json can be empty (Maximo)
```
{}
```
    - config.json (OpenJet)
```
{
"eamType": "open"
}
```
  - Config at other location or filename different: https://your-insightserver.com/other-folder/prod.json
    - Server URL in app: https://your-insight-server.com/other-folder/prod.json
    - prod.json
    (OpenJet)
```
    {
    "server": "https://your-insight-server.com/"
    "eamType": "open"
    }
```
  - Config at other location different server: https://your-insightserver.com/other-folder/prod.json
    - Server URL in app: https://your-insight-server.com/other-folder/prod.json
    - prod.json
    (OpenJet)
```
    {
    "server": "https://your-insight-server-prod.com/"
    "eamType": "open"
    }
```
  - Config with multiple endpoints: https://your-insight-server.com/insight/mobile/config.json
    - Server URL in app: https://your-insight-server.com/insight/mobile/config.json
    - In the mobile can be switched between the endpoints.
    - config.json
```
{
"endpoints": {
"external":{
"label": "External",
"server": "https://external-insightserver.com"
},
"internal":{
"label": "Internal",
"server": "https://internal-insightserver.com"
        }
    }
}
```
  - The Config can be scanned via barcode. QR-Codes are suitable. There are two variants of barcode content:
    - Only the server url: https://your-insight-server.com
    - Initial, minimal Config (all of the following parameters from table are supported): {"clientConfigUrl":"https://your-insight-server.com"}

Parameters:¶

Parameter	Values	Standard	Description	Mobile	Web
server	config.js: "/" config.json: "https://example.com"	config.js: "/" config.json: the host without 'insight/mobile/config.json'	The server base URL to the Insight-Endpoints. Normally the host of the HTTP-Server.	+	+
eamType	"maximo", open"	"maximo"	The EAM-Type to connect to.	+	+
eamUrl	"https://example.com/other/eam"	`<server>/insight/eam`	Divergent-"/insight/eam"-Endpoints. Only needed if insight is not behind HTTP-Server.	+	+
downloadUrl	"https://example.com/other/download"	`<server>/insight/download`	Divergent-"/insight/download"-Endpoints. Only needed if insight is not behind HTTP-Server.	+	+
heartbeatUrl	"https://example.com/heartbeat.txt"	`<server>/insight/user/data`	Divergent-Heartbeat-Endpoint. Only needed if insight is not behind HTTP-Server or you dont want a heartbeat to the EAM-Backend	+	+
maximoRestApp	"/maximo"	"/maxrest"	MAXIMO ONLY: If the "/maxrest"-Endpoint of Maximo can't be used.	+	+
autoSync	true, false	true	Automatically upload and download of data records	+
appParams	{ "key": "value", "key2": "value2" }	no default	Can be used in replacements: Working with variables/values.md)	+	+
disableofflinesupport	true, false	false	Offline-data-records can be disabled. For example: insight-mobile in browser but without offline support.	+
downloadInterval	any positive number	15	Download interval in minutes. How often the data records are downloaded.	+
downloadValidateInterval	any positive number	1	Download validate interval in minutes. How often the client asks the server for new downloads/deltas.	+
downloadOnOnline	true, false	false	Downloads data records when online. Normally used for "mostly-offlinedevices" (Dockingstation)	+
websocketNotification	true, false	false	insight-web can be notified for data changes by websocket.		+
portalMode	true, false	false	No login screen, the host application must trigger the login.		+
notificationWebsocketUrl	"https://example.com:8080/insightindexer/notification"	Not Maximo: `<server>:8080/insightindexer/notification` Maximo: `<server>:8080/insight-indexer/notification`	Normally used if the HTTP-Server don't support WebSocket-Proxy. (IBM-HTTP-Server don't support WebSocket-Proxy)		+
searchServer	"https://example.com:9222/"	`<server>/insight/search`	Divergent-Elasticsearch-Endpoint. Only needed if insight is not behind HTTP-Server	+	+
disableSettings	true, false	false	Hides the insight-mobile menu item "Settings"	+
disableXRay	true, false	false	Hides the insight-mobile menu item "XRay"	+
pushnotification	true, false	false	Enables support of PushNotifications to the insight-mobile-app	+
offlineTimeout	180	no timeout	Logout after interval of inactivity in minutes	+
startPage	Examples: "upload" "push" "tree/workorderquickrep"	no default	Page to be shown after login.	+
admin	true, false	false	Admins can login if someone else has unsynced, offline changes. There are also two buttons to reset the app on the login screen.	+
heartbeatOnNetwork	true, false	5	Heartbeat is only executed when the client has network. The online and offline events are used by the browser, which do not work so reliably on all platforms and are therefore not used as a standard.	+
heartbeatInterval	Heartbeat off: 0 or -1 Heartbeat on: any positive number	5	Heartbeat interval in seconds	+
clientLogging	true, false	false	Tracks logs in the client. There is a new menu item for the logs.	+
clientLogSize	any positive number	100	Amount of queued client logs	+
name	any string	no default	For Example: server-, system-, or projectname. Will be visible on: information popup; mobile server config header; mobile menu header; mobile login header	+	+
disableOffline	true, false	false	Hides the insight-mobile menu item "Offline"	+
fingerprint	true, false	false	Enables iOS TouchId/FaceId authentication	+
barcodeOptions	{ "key" : "value" }	no default	Configuration for the native app barcode scanner plugin (Android, iOS). All parameters are given to the plugin. See: https://github.com/phonegap/phonegap-pluginbarcodescanner	+
disableBarcode	true, false	false	Hides all barcode icons	+
maxDocuments	any positive number	100	Max file download count per tree config.	+
legacyToolbar	true, false	false	Switch to the multi line behavior of the toolbar in mobile	+
showUserInHeader	true, false	false	Shows the logged in user on the top of each page	+
heartbeatTimeout	any positive number	5000	Heartbeat request timeout in milliseconds	+	+
searchPattern	"startsWith", "endsWith", "contains"	no default	see here		+
listTextOverflow	"ellipsis"	no default		+
selectFromTreeEnabled	true, false	false	Activate manual inputs on all "selectFromTree"-attributes.	+	+
navbar	{size: 'small'}, {size: 'big'}	{size:'small'}	Changes the size of the navbar	+
searchDelay	any positive number	100	Delay time in ms after which any search or filter action is triggered	+	+
newOfflineAtEnd	true, false	false	New offline created records are shown at the end of the root list.	+
changedOfflineAtEnd	true, false	false	Offline changed records are shown at the end of the root list.	+
footerButtons	true, false	false	Displays the save and cancel button in an always visible footer	+
skipMaximoUiLogin	true, false	true	Reenable Maximo-Ui-Login, not needed with LDAP/appServerSecurity=1 authentication
barcodeCameraDisabled	["TC8000","MYDEVICE"]	no default	Use the barcode scanner hardware for specific device models.	+
configTimeout	any positive number	30000	Timout to load all tree configurations in milliseconds	+	+
showOfflineAnnotation	true, false	false	Shows the offline downloaded annotation on each record.	+
disableDefault	true, false	false	Suppresses the creation of a Start-Center tab when working with Maximo	-	+
disableMaximoUi	true, false	false	Completly disable the integration of the Maximo User-Interface, sets disableDefaultTab=true when enabled		+
enableNfc	true, false	false	Shows the nfc icon on the search field.	+
barcodeIcon	icon class string	no default	Overrides the default barcode icon.	+
disableExpertSearch	true, false	true	Removes the Expert-Search option in webclient		+
toolbar.maxActions	positive number	5	amount of actions in a tree toolbar, search and sort included		+
eulaURL	URL or empty to hide	https://insight-control-panel.github.io/documentation/v${MajorVersion}/license/	Full qualified URL to customers EULA	+	+
legalNoticeURL	URL or empty to hide	https://rodias.de/impressum/	Full qualified URL to customers legal notice	+	+
privacyPolicyURL	URL or empty to hide	https://insight-control-panel.github.io/documentation/v${MajorVersion}/privacy/	Full qualified URL to customers privacy policy	+	+
informationURL	URL or empty to hide	https://www.rodias.de/en/insight-control-panel/maintenance-portal/	Full qualified URL to customers privacy policy	+	+